USED SPINDLE POLISHERS, BELT LINISHERS, SURFACE GRINDERS

You can find our current stock list below. We are constantly receiving new stock, so please contact us if the machine you require is not on this list.
 
Jones & Shipman 540 Surface Grinder - Power feeds. 2880 rpm wheel. c/w Eclipse AX126 12" x 6" magnetic vice. Usual quality and in outstanding. condition See front page picture.

£2,250. + vat


Don't Forget we also sell a range of NEW Belt Linishers,


Deburring units & Pipe end preparation Grinders/Notchers !


Jones & Shipman 540 - 18" x 6" - Surface grinder. Just in....

£1,995. + vat

Exel (Swing Ring Type) Surface Grinder - Verticle spindle Grinder C/w Eclipse 10" x 6" magnetic chuck/vice. Floor standing, 1.5hp, 3 phase. The head swivles/pivots from side to side by hand. 7" cup wheel. Ideal for tool sharpening etc.

£795. + vat

Heavy Duty Grinder 20" x 3" wheels - Single ended. 3 ph. .

£495. + vat

RJH 6" wide Belt Linisher - 3 phase, 2hp - Belts 1090 x 150mm.

£345. + vat

RJH 4" wide Belt Linisher - 3 phase, 1hp - Belts 915 x 100mm.

£295. + vat

Canning Heavy Duty Double ended Spindle Polisher - Solid looking base unit. 3 hp ?

£495. + vat

Vanco 2" (50mm) Verticle Belt Linisher - Sander Linisher 1.5hp, 3 hp motor.

£345. + vat

6" Belt Linisher - Coming shortly.

£395. + vat

Snow Grinder - Just in. Not many about !! See picture below right.

£1,225. + vat

Belt Linishing Unit 75mm x 2000mm - Floor standing horizontal or vertically positioned unit. 3" wide belt x 2000mm circ. belt length. 3 phase.

£465. + vat

6" Horizontal Belt Linisher - 3 phase, Just in !!

£425. + vat

Canning 3 Hp Spindle Polisher - 2520rpm. C/w 2" belt linishing attachment.

£685. + vat

Strippit Punch & Die Grinder - Small bench top model. 6" 3 jaw chuck, part No. 85010.00.

£625. + vat

Clarkson Tool & Cutter Grinder - Floor/pedastal mounted. Ring for details ...

£295. + vat

Elesco Flat Plate Belt Linisher Unit - Brush marking Stainless Steel or Deburring - 3 phase.

£1,345. + vat

Tool Post Grinder - Ideal Lathe mountable. 6" max but currently 5" x 1" wheels c/w independent motor. X & Y axis adjustable..

£225. + vat

Burrmaster Deburring machine - Purpose made complete with Spenstead dust control unit. 3 phase.

£895. + vat

Viceroy Grinder & Polisher - 4 Model TDS 8/9/P. 3 phase unit on floor standing pedestal base c/w 8" x 1" grinding wheel and Screw c/w Polishing Mop. Guards and Light. Speeds 2388/2865rpm.

£295. + vat

Vanco 1" wide Vertical Linisher - 240 volts. Table mounted (small).

£225. + vat

Milford double ended Spindle Polisher - 3 phase.

£215. + vat